Dell Networking W Series 205H Access Points - Access Point|Dell Access Point
Dell Networking W Series 205H Access Points
specifications
• W-AP205H (controller-managed) and W-IAP205H (Instant): Dual radio 2x2:2 802.11ac APs for hospitality and branch offices with integrated antennas, three local Gigabit Ethernet ports, PoE out, USB host interface. Supports wall-box and desk-mount deployments.
Advanced features
• RF management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
- The 205H can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
• Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4GHz and 5GHz radio bands to identify sources of RF interference
• Security
- With an OpenDNS service subscription, Dell IAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN
- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
- SecureJack-capable for secure tunneling of wired Ethernet traffic
Operating modes
• Controller-managed AP
• Remote AP (RAP) for branch deployments
• Air monitor (AM) for wireless IDS, rogue detection and containment
• Spectrum analyzer, dedicated or hybrid
• Secure enterprise mesh Wireless radio specifications s • AP type: Indoor, dual radio, 5GHz 802.11ac and 2.4GHz 802.11n 2x2:2
• Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1)
• 2x2 MIMO with two spatial streams and up to 867Mbps (80-MHz channel) or 400Mbps (40MHz channel) wireless data rate
• Supported frequency bands (country-specific restrictions apply):
- 2.4000 to 2.4835GHz
- 5.150 to 5.250GHz
- 5.250 to 5.350GHz
- 5.470 to 5.725GHz
- 5.725 to 5.850GHz
• Available channels: Dependent on configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256- QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power (antenna gain not included):
- 5GHz band: +21 dBm (18 dBm per chain)
- 2.4GHz band: +21 dBm (18 dBm per chain)
- Power may be restricted to comply with local regulatory rules
• ACC minimizes interference from cellular networks
• Maximum ratio combining (MRC) for improved receiver performance
• Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
• Short guard interval for 20MHz, 40MHz and 80MHz channels
• Space-time block coding (STBC) for increased range and improved reception
• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
• Transmit beam-forming (TxBF) for increased reliability in signal delivery
• Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support: VHT 20/40/80
• 802.11n/ac packet aggregation: A-MPDU, A-MSDU Antennas
• Four integrated semi-directional antennas for 2x2 MIMO with maximum antenna gain of 4.0 dBi in 2.4GHz and 6.0 dBi in 5GHz. Built-in antennas are optimized for vertical orientation of the AP.
Other interfaces
• Uplink: 10/100/1000BASE-T Ethernet (RJ-45, back)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD (input): 48V DC (nominal) 802.3af/at PoEoE
• Local: Three 10/100/1000BASE-T Ethernet (RJ-45, bottom)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- One port: PoE-PSE (output): 48V DC (nominal) 802.3af PoE Passive pass-through interface (two RJ-45, back and bottom)
• USB 2.0 host interface (Type A connector)
- 3G/4G cellular modems
- Device battery charging port
- Capable of supplying up to 1A/5 watts of power to an attached device
• DC power interface, accepts 1.35/3.5mm centerpositive circular plug with 9.5mm length
• Visual indicators (LEDs):
- Power/system status
- PoE-PSE status
• Reset/LED control button (“paperclip access”)
- Factory reset (when activated during device power-up)
- LED control: toggle off/normal
• Serial console interface (custom, four-pin header)
• Kensington security slot
Power
• Direct DC source: 48V DC nominal, +/- 5%
• Power over Ethernet (PoE): 48V DC (nominal) 802.3af/ at compliant source
• Power sources sold separately:
- DC: AP-AC-48V36 (48V/36 watts)
- PoE: PD-9001GR-AC (802.3at)
• When both power sources are connected and active, DC power takes priority
• Power modes:
- DC: unrestricted mode (USB: 5 watts max, PoE-PSE: 15.4 watts max)
- 802.3at PoE: reduced mode (USB disabled when PoE-PSE enabled, PoE-PSE reduced power budget: 10 watts max)
- 802.3af PoE: restricted (USB and PoE-PSE disabled)
• Maximum (worst-case) power consumption:
- DC: 12 watts max, plus 16.5 watts max for PoE-PSE and 5.5 watts max for USB
- 802.3at PoE: 13 watts max, plus 11.5 watts max for PoE-PSE or 6 watts max for USB
- 802.3af PoE: 13 watts max
• Maximum (worst-case) power consumption in idle mode (excluding PoE-PSE, USB): 7.5 watts
Mounting
• Included with AP: Mount plate to attach AP to single gang wall-box (most international variations covered), security screw
• Optional mounting kits:
- AP-205H-MNT2: Mount plate and insert for use with dual gang box (most North America variations covered)
- AP-205H-MNTR: Desk mount conversion kit – includes desk mount and RJ-45 jumper Mechanical
• Dimensions/weight (with supplied single-gang wall box mount plate, as mounted):
- 86 mm (W) x 40 mm (D) x 150 mm (H), 3.38” (W) x 1.57” (D) x 5.90” (H)
- 375 g/13.22 oz
• Dimensions/weight (shipping):
- 115 mm (W) x 63 mm (D) x 167 (H), 4.52” (W) x 2.4” (D) x 6.57” (H)
- 500 g/17.63 oz
Environmental
• Operating:
- Temperature: 0° C to +40° C (+32° F to +104° F)
- Humidity: 5% to 95% non-condensing
• Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
• FCC/Industry of Canada
• CE Marked
• R&TTE Directive 1999/5/EC
• Low-Voltage Directive 2006/95/EC
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1 and EN 60601-1-2
Reliability
MTBF: 709,492 hours (81 years) at +25° C operating temperature
Regulatory model number
• W-AP205H and W-IAP205H: APINH205
Certifications
• CB Scheme Safety, cTUVus
• Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
Warranty
• Extended Lifetime Warranty
Minimum software versions
• AOS 6.4.3.1
• Instant 4.2.0.0
CLICK TO CALL